Tired of dreading your morning shower since stepping out of the shower seems like stepping into an icebox? Whether your home is new or old, you may always find your bathrooms cold.
Modern houses with forced air heating systems often come with heating units that don't really have the 'umph' to get the warm air to the bathroom. On the other hand, older homes could be drafty and badly insulated - the major causes behind chilly bathrooms.
Well, no more suffering in your own bathroom. Just get an energy-efficient bathroom heater and raise your comfort level when using the lavatory. But how do you find the best bathroom heater? This is where the FaucetsReviewed team comes in. Our thoroughly tested and carefully selected list of bathroom heaters could help you come to a final decision!
Our Top 10 Best Bathroom Heater List
Best Bathroom Heater: Buying Guide
1. Heat Output
Most heaters come with the measurement of their heating abilities in the unit of square feet. Some also give measurement of their heating power in watts. Measure the size of your bathroom and then go for a specific brand/model that meets the requirements of your bathroom. If your bathroom has a ceiling that’s higher than average, you’ll need a stronger heater that can warm the whole area.
2. Safety Features
Because bathrooms are usually humid and wet, bathroom heaters can cause multiple disasters. If water touches any exposed electrical wiring, it will lead to short circuits or electrocution. This can cause serious injuries or even death.
That’s why the safety features of bathroom heaters are essential. We have identified some key safety features that you should look into before buying a bathroom heater.
a) Overheating Protection
You won’t find this feature in all bathroom heaters but most heaters nowadays include this in their feature list. If you’re concerned about safety, then you should go for the ones that come with the overheating protection.
Units that come with this feature have a built-in temperature sensor that detects if the temperature gets too high and turns off the heater immediately. Not only does it save your heater from being damaged, but you get to save on your electricity bill as well.
A bathroom heater usually gets too hot in some situations. If your heater is covered with something like a towel or a blanket, the sensors will turn off the heater before it gets hot enough to catch fire on whatever that’s covering it.
Another situation when your heater can get too hot is when the thermostat of the device doesn’t work. Though most of the modern heaters come with a thermostat that regulates the heat. If the thermostat of your unit isn’t working, your heater will just keep producing heat. In this situation, your heater will completely depend on the temperature sensors to avoid any disasters.
b) Tip-Over Protection
This feature is a must in all modern-day bathroom heaters that stand on the floor. Heaters that include this feature have a post loaded with a spring attached on the bottom. Whenever it is pushed in by the floor, the heater works and produces heat. When the heater is picked up or tipped over, the post is pushed out by the spring and the device turns off immediately.
c) Cool-Touch Housing
This safety feature eliminates the chances of any accidental burns that might be caused by touching the body of a heater. This ensures that the exterior of the heater isn’t too hot. This feature is really useful, especially if there are children and pets in the house.
a) Convection Heaters
Convection is a process in which heat transfers by the movement or circulation of the warmer parts of a gas or liquid. Any heater that depends on this process for generating heat is called a convection heater.
In a convection heater, the electricity goes through a resistor that converts it into heat energy. Any convection heater works in the same process. These heaters are capable of generating and distributing heat at a faster rate than any other type of heater.
b) Fan Heaters
These heaters are also known as blow heaters. These heaters generate heat by passing air over a heat source with the help of a fan. This heats the air that eventually warms up the entire surrounding area.
Fan heaters work best in an enclosed space or room. Though these heaters generate an audible and continuous noise just like a fan which can be a bit disturbing for some users.
c) Infrared Heaters
These heaters are also referred to as heat lamps. An infrared heater uses the higher temperature of a body to transfer heat to another body that has a lower temperature by using electromagnetic radiation. To do so, the heater doesn’t need a contact medium to pass heat between the two bodies. Infrared Heaters can work in the atmosphere or even a vacuum.
d) Ceramic Heaters
Ceramic heaters generate heat with the help of the PCT (Positive Temperature Coefficient) ceramic heating elements. These heaters are also known as space heaters. They’re portable and most suitable for heating small rooms or bathrooms.
4. Energy Efficiency
Energy efficiency is one of the key elements that you’ll have to look for in a bathroom heater before buying it. Most modern heaters available on the market are energy efficient. If your heater is energy efficient, it will reduce your electricity bills.
Aside from being cost effective, the energy efficient heaters have a positive impact on the environment. That’s why energy efficiency is very crucial for bathroom heaters.
5. Safety Certification
Before buying a bathroom heater, ensure that it is certified by a renowned independent testing agency. The testing confirms that a certain product is built according to North American Safety Standards and if it’s safe to use (by following the instructions on the manual).
6. Quiet Operation
Naturally, you’d want your heater to work quietly. Most modern bathroom heaters are as quite as possible but you’ll still find a huge number of heaters on the market that aren’t. Noisy and loud heaters can be really unpleasant because they make a continuous audible noise.
Some heaters produce a steady hum while working, for example; the space heaters. These noises are not as bothersome as the more disturbing sound of a powerful fan heater. If you want a quite and peaceful bathroom that’s heated properly, you should get a bathroom heater that makes no noise or the least amount of noise.
Safety Tips for Bathroom Heaters
- Make sure that your heater has a label that indicates that the device is listed by a well-known testing lab.
- Before you start using your heater, read the instructions given in the manual and watch out for any kind of warnings given by the manufacturers.
- Inspect your heater for any kind of broken plugs, cracks and lose connections before you start using it. If found, then avoid using the heater.
- Don’t leave your heater unattached. Make sure to turn it off before going to sleep or whenever you’re leaving the house.
- Avoid using your bathroom heater for other purposes for example; drying damp cloths or warming thaw pipes.
- Ensure proper placement for your bathroom heater.
- Plug heaters directly into wall outlets and avoid using power strips or extension cords.
Q. 1: How often can you use a bathroom heater?
Ans: Modern heaters are usable for a long time. You can use your bathroom heater as many times as you wish in a day if it has overheating protection. If the heater gets too hot, it will shut down automatically.
Q. 2: Is it a safety hazard to run a heater in the bathroom?
Ans: Modern heaters are designed to avoid most disasters that might happen in a bathroom. But they are still electronic devices and any faults in your unit can create hazardous situations. Our advice will be to use them with caution and proper knowledge of the product.
Q. 3: Is it ok to use a halogen heater in the bathroom?
Ans: Halogen heaters aren’t designed for bathrooms. So, we wouldn’t recommend using a halogen heater in the bathroom.